battery operated roller shutter
With our diy roller shutters you can choose between the ODS l10 mech or you can choose to upgrade to the T20 tubular motor.
ODS L10 mech
The ODS L10 mech is a 12V lateral motor which has been specifically designed to work in conjunction with Ozroll’s low voltage DC controllers. This motor can fit in end plates 165mm and above, making it available for use in shutters when the width is too small for a tubular motor, such as bathroom windows or bay windows. An internal gear works as a down stop for the motor which is set in our factory during assembly. Resistance causes the motor to stop on the way up which is achieved by using stops in the shutter guide. This means there is no limit settings required during installation
The ods l10 Mech comes with a 2 (two) year warranty
ODS T20 tubular motor
T-Series motors T20 are 12V tubular motors which have been specifically designed to work in conjunction with Ozroll’s low voltage DC controllers. Internationally renowned for a smooth, quiet and reliable operation, each T-Series motor is provided with a tool to set the up and down limits using progressive twist limit settings.
The T20 tubular is highly recomended for install of our diy roller shutters as they tend to last much longer then the l10 mech
The T20 comes with a 3 (three) year warranty
Somfy 240v electric motor
Designed specifically for roller shutters, Somfy’s reliability with a design that benefits the roller shutter market. Available in torques from 10Nm to 40Nm, coupled with its flexible 48mm design, it is adapted for Ozroll’s 50mm circular and 60mm octagonal axles. This European built motor utilizes progressive limit settings, making it perfect for roller shutter installation.
These motor comes with somfy’s 5 (five) year warranty