roller shutter parts
roller shutter spare parts
Roller shutter spare parts open 24×7 and every part can be delivered to your door. roller shutter spare parts. elipso strap controls, winder box, T-20 Mech, ODS L10 Mech, Control 10 to e port controller conversion kit
elipso strap controls
elipso strap controls
This modern day take on a conventional design is mainly used on smaller openings where there is a lack of wall space. The Elipso Strap Control offers a smooth appearance, incorporating a contemporary curved design that suits today’s home improvement trends.
High quality materials are used on both the casing and the internal mechanism, which means quick and reliable operation with an attractive finish.
Series 2 multi-fit winder box
Series 2 multi-fit winder box
This unit is available for use with either a cord or tape running through the wall cavity and down the internal face of the wall to the winder kit which can be fixed next to the opening.
This roller shutter winder box offers the diversity of both vertical and horizontal installation by simple exchange of the roller and hole cap provided.
T 20 Mech
T 20 Mech motors are 12V tubular motors which have been specifically designed to work in conjunction with ozroll’s low voltage DC controllers.
Internationally renowned for a smooth, quiet and reliable operation, each T 20 Mech is provided with a tool to set the up and down limits using progressive twist limit settings.
ODS L10 Mech
The ODS L10 Mech is a 12V lateral motor which has been specifically designed to work in conjunction with ozroll’s low voltage DC controllers.
This motor can fit in end plated 165mm and above, making it available for use in shutters when the width is too small for a tubular motor, such as bathroom windows or bay windows.
An internal gear works as a down stop for the motor which is set in the factory during assembly. resistance causes the motor to stop on the way up which is achieved by using stops in the shutter guide. This means there is no limit setting required during installation.
Control 10 to e port controller conversion kit
Control 10 to e port controller conversion kit
The original design battery pack for the Ozroll Drive System was the ODS control 10.
Since the implementation of the newer and far superior e port controller Ozroll began to phase out the control 10, stopping production in 2011 and eventually running out of stock in 2013.
The e port is easily interchangeable with existing systems, however the wall plate for the control 10 and e port controllers are totally different and do not have the same mounting foot print, To help make the transition period as smooth as possible Ozroll have designed and introduced the conversion wall plate.
To achieve a fluent and clean conversion, the control 10 wall plate must be removed. The conversion plate is fixed to the wall using the existing mounting holes and the e port wall plate is then attached to the conversion wall plate. Once paired together they emerge as one unit, the e port slots in and the upgrade is complete.
