roller shutter parts and tools
We have a large range of roller shutter spare parts. Our roller shutter parts are factory direct so we can give you the best price.
All our roller shutter parts are genuine and made in Australia.
We sell e port controllers and winder box to ods l10 mechs and also somfy motors. We also sell the little parts that go inside the head box.
Convert your manual roller shutter to either 12 Volt Battery operated system, using the ods l10 mech or the T20 mech. You can also convert using the 240 Volt Electric Somfy motor system.
We also stock the new ods e-port controller that has replaced the control 10 remote.
If you don’t have roller shutters yet and want to save on install, We have a range of DIY roller shutters.
Dont need roller shutters? have a look at our DIY outdoor/indoor blinds.
-
10mm wall anchors roller shutter spare parts
Tapered at one end for quick and easy insertion. Convenient frame pack. Suitable for 10 – 12 gauge screws.
$4.95Add to cart -
140mm or 170mm Springs
140mm or 170mm springs
$9.00Select options -
14mm Tape for roller shutter winder box
roller shutter spare parts
14mm wide tape for roller shutter
ozroll brand
made to last
comes in 5 meters
$15.00Add to cart -
5 meters of wire cable for cable winder box
5 meters of wire for roller shutter cable winder.
$14.00Add to cart -
50mm octagonal roller shutter axle
50mm axle Used to connect the axle to the roller shutter end plate. secure axle insert to axle with pop rivet so it does not slip .
$25.00Add to cart -
60mm octagonal roller shutter axle (Black)
60mm octagonal Black
$25.00Add to cart -
60mm octagonal roller shutter axle (blue)
Blue
$25.00Add to cart -
Box End Inserts – in reveal
roller shutter spare parts
11.916.401 – 11.917.401
helps your strap to roll through the wall efficiently.
$18.00Add to cart -
Box End Inserts – on wall
roller shutter spare parts
11.918.401 – 11.919.401
pack contains left and right
$18.00Add to cart -
Sale!
cable winder box (Madrid)
roller shutter spare parts
on wall cable winder box
80 mm x 115 mm x 55mm
$85.00Add to cart -
Sale!
cable winder wire box
roller shutter spare parts
comes with handle
used with the metal wire cable
$85.00Add to cart -
cord Winder Box
roller shutter spare parts
easy diy install tape strap box
easy to install with just 4 screws
W 150mmx H 120mm x 35mm
$45.00Add to cart -
Craftright rivett gun set roller shutter spare parts
Used to drive and secure rivets and attaching various materials, especially joining metals permanently.
$15.90Add to cart -
Diamond Neck Roller
roller shutter spare parts
13.240.401
goes on the inside of the house
$24.00Add to cart -
E port controller by ozroll
roller shutter spare parts
15.600.001
replaces the old control 10 remote
battery capacity (1,600mAh) Lithium Ion
comes with battery pre-installed
$105.00Add to cart -
Sale!
E port conversion kit wall plates
roller shutter spare parts
use this if you are changing from the old control 10 remote
part number : 15.202.001
used with the e port controller
$20.00Add to cart -
elipso tape strap control
roller shutter spare parts
13.151.401
Slim Design with out handle
Easy Installation
$30.00Add to cart -
End plate for roller shutter
roller shutter spare parts
End plate for roller shutter 165mm, 180mm, 205mm
$35.00Select options -
in wall cable winder box
roller shutter spare parts
Croci in wall cable winder box
comes with wall plate and in wall section
$100.00Add to cart -
Sale!
L10 Mech Adapter
roller shutter spare parts
used if changing from old control 10 mech
Comes in 50mm round, 50mm octagonal and 60mm octagonal.
$32.00Add to cart -
ODS retro-fit kit for T-series tubular motors
retro fit kit for e series battery motors
ods T20
e port controller
e port charger
conversion kit
drive wheel
$405.00 – $420.00Select options -
Sale!
ODS T20 low volt mech
roller shutter spare parts
To be used with the e port controller and RF controller
Nominal Torque: 20Nm
used with the battery operated roller shutters
$220.00Add to cart -
Sale!
OzRoll E Series AC Charger
roller shutter spare parts
15.580.001
charger for e-port controller
can be used with old control 10 remote
$20.00Add to cart -
Ozroll Eseries ods l10 mech
roller shutter parts
replaces the old control 10 mech
15.121.000
upgrade to the T20 mech
$120.00Add to cart -
Sale!
OzRoll ODS control 10 replacement battery part
roller shutter parts
used for the old control 10 remote
we have the new e port controller available
$65.00Add to cart -
Pack of 4 roller shutter replacement insert AR400 slat (black)
roller shutter spare parts
used for AR400 slat
(black)
10.180.415
$12.00Add to cart -
Pack of 4 roller shutter replacement insert AR400 slat (sand)
used for AR400 slat
colour sand
10.180.411
$12.00Add to cart -
pack of two Standard end plate legs
roller shutter spare parts
End Plate Leg
11.610.700
$20.00Add to cart -
powersmart cradle controller charger
To be used with the powersmart cradle and removeable battery
$30.00Add to cart -
powersmart removable battery
powersmart 12v removable battery
from cwp roller shutters
41-800-200
capacity 2200mAh, 32Wh
To be used with powersmart controller and cradle
$110.00Add to cart -
PowerSmart™ Controller Cradle & Bracket
PowerSmart battery operated roller shutters
All-in-one 12V control system & battery
Built-in radio receiver
Battery not included
$80.00Add to cart -
roller shutter bottom bar stopper
roller shutter spare parts
This is the roller shutter bottom bar stopper it is the “V” type
10.920.415
$12.00Add to cart