-
140mm or 170mm Springs
140mm or 170mm springs
$9.00Select options -
2.0” Round LT50 Drive (50 mm x 1.5 mm) – Hard clip
2.0” Round LT50 Drive (50 mm x 1.5 mm) – hard clip for 50mm round axle
$25.00Add to cart -
2.0” Round LT50 Drive (50 mm x 1.5 mm) – Soft clip
2.0” Round LT50 Drive (50 mm x 1.5 mm) – Soft clip for 50mm round axle
$25.00Add to cart -
50mm octagonal roller shutter axle
50mm axle Used to connect the axle to the roller shutter end plate. secure axle insert to axle with pop rivet so it does not slip .
$25.00Add to cart -
60 mm Octagonal LT Drive
60 mm Octagonal LT Drive
will need 60 mm Octagonal LT50 Crown
$25.00Add to cart -
60 mm Octagonal LT50 Set
60 mm Octagonal LT Drive set this is for both the drive and crown if you have the 60mm octagonal axle
$25.00Add to cart -
60mm octagonal roller shutter axle (Black)
60mm octagonal Black
$25.00Add to cart -
60mm octagonal roller shutter axle (blue)
Blue
$25.00Add to cart -
Box End Inserts – in reveal
roller shutter spare parts
11.916.401 – 11.917.401
helps your strap to roll through the wall efficiently.
$18.00Add to cart -
Box End Inserts – on wall
roller shutter spare parts
11.918.401 – 11.919.401
pack contains left and right
$18.00Add to cart -
Sale!
cable winder wire box
roller shutter spare parts
comes with handle
used with the metal wire cable
Original price was: $105.00.$85.00Current price is: $85.00.Add to cart -
Diamond Neck Roller
roller shutter spare parts
13.240.401
goes on the inside of the house
$24.00Add to cart -
E port conversion kit wall plates
roller shutter spare parts
use this if you are changing from the old control 10 remote
part number : 15.202.001
used with the e port controller
$30.00Add to cart -
elipso tape strap control
roller shutter spare parts
13.151.401
Slim Design with out handle
Easy Installation
$30.00Add to cart -
in wall cable winder box
roller shutter spare parts
Croci in wall cable winder box
comes with wall plate and in wall section
$100.00Add to cart -
Sale!
ODS T20 low volt mech
roller shutter spare parts
To be used with the e port controller and RF controller
Nominal Torque: 20Nm
used with the battery operated roller shutters
Original price was: $265.00.$220.00Current price is: $220.00.Add to cart -
Ozroll Eseries ods l10 mech
roller shutter parts
replaces the old control 10 mech
15.121.000
upgrade to the T20 mech
$120.00Add to cart -
OzRoll ODS control 10 replacement battery part
roller shutter parts
used for the old control 10 remote
we have the new e port controller available
$75.00Add to cart -
pack of two Standard end plate legs
roller shutter spare parts
End Plate Leg
11.610.700
$20.00Add to cart -
powersmart removable battery
powersmart 12v removable battery
from cwp roller shutters
41-800-200
capacity 2200mAh, 32Wh
To be used with powersmart controller and cradle
$110.00Add to cart -
PowerSmart™ Controller Cradle & Bracket
PowerSmart battery operated roller shutters
All-in-one 12V control system & battery
Built-in radio receiver
Battery not included
$80.00Add to cart -
Round 50mm (red) axle insert
roller shutter spare parts
50mm red axle
the most common for the round axles
$25.00Add to cart -
SOMFY 240V LTN motors 15Nm (solus pa)
New updated motor to replace the solus PA
min shutter width 635mm
230v 50hz motor
progressive set limits
torque 30nm
speed 12rpm
$210.00Add to cart -
SOMFY 240V LTN motors 30Nm (solus pa)
New updated motor to replace the solus PA
min shutter width 710mm
230v 50hz motor
progressive set limits
torque 30nm
speed 12rpm
$285.00Add to cart -
somfy 410 motor bracket
Somfy LT50 HA Flush Mount Motor Bracket (#9410715) for Somfy Motors Allows flush mounting of the motor head against the mounting surface. Maximum motor torque – 50 Nm. Note: Maximum system load will vary depending on application. Perfect for tight installations Main technical information Application: Motorized Rolling shutter
$25.00Add to cart -
somfy LT50 10nm jet
For small to medium shutters
min shutter width 640mm
L1 (mm): 525
Strong lifting capacity.
Dependable performance.
Transform your room in seconds with one click of a simple to use app.
Use natural voice commands to control RTS motorized solutions by adding myLink.
$270.00Add to cart -
Somfy LT50 15NM Atlas
For small to medium shutters
min shutter width 640mm
L1 (mm): 525
Strong lifting capacity.
Dependable performance.
Transform your room in seconds with one click of a simple to use app.
Use natural voice commands to control RTS motorized solutions by adding myLink.
$280.00Add to cart -
Somfy LT50 25NM meteor
For medium size roller shutters
min shutter width 660mm
L1 (mm): 555
Strong lifting capacity.
Dependable performance.
Transform your room in seconds with one click of a simple to use app.
Use natural voice commands to control RTS motorised solutions by adding myLink.
$315.00Add to cart -
Somfy LT50 30NM Helios
For medium to large shutters
min shutter width 710mm
L1 (mm): 605
Strong lifting capacity.
Dependable performance.
Transform your room in seconds with one click of a simple to use app.
Use natural voice commands to control RTS motorised solutions by adding myLink.
$330.00Add to cart -
Somfy LT50 40NM Mariner
For medium to large shutters
min shutter width 760mm
L1 (mm): 655
Strong lifting capacity.
Dependable performance.
Transform your room in seconds with one click of a simple to use app.
Use natural voice commands to control RTS motorised solutions by adding myLink.
$345.00Add to cart -
Somfy OXIMO RTS 20/17
MIN Shutter width 770
Somfy Connexoon ready
$440.00Add to cart -
Standard Box End Insert Guides roller shutter spare parts
roller shutter spare parts
Standard Box End Insert Guides (Square or Round Hood Boxes)
Pair A 11.938.408 B 11.939.408
$20.00Add to cart